Yes, and with our standard C1 cam. Good for three way valves or valves/actuators with slave linkage the standard Cam can also be used for split ranging. Split ranging is when you have two control valves on one input signal and you need one valve to open from 3 to 9psi (4 to 12mA) and the other valve to start to open from 9 to 15 psi (12 to 20 mA). For the 180 degree rotation for direct acting you will need to set the cam up with the roller where number 9 is displayed in the picture below.

As always if you have any question please give us a call. Or you can email our technician Matt Dill.